Therefore, nanographite exhibits great superiority in the lubrication field, especially under harsh circumstances like high-temperature or extreme-pressure conditions [3, 4]. However, nanographite is difficult to apply in water-based fluid because

of its hydrophobicity [5–7]. Cutting fluid plays an important role in the manufacturing industry as lubricant [8]. It can be mainly classified into two categories: oil-based and water-based cutting fluid. The primary functions of cutting fluid include lubrication, cooling, cleaning, and antirust. At present, the lubrication performance of oil-based cutting fluid is outstanding, but this website its cooling property is inferior. On the contrary, water-based cutting fluid shows powerful ability in cooling, cleaning, and antirust, but it is relatively weak in lubrication [9]. Nowadays, increasingly strict environmental regulations result in higher operating costs for metal cutting. Water-based cutting fluid is utilized more and more popularly,

owing to its low-cost and less-waste emissions than oil-based cutting fluid [10]. However, the water-based cutting fluid is not ideal due to its inferior lubrication ability [8]. Consequently, Pexidartinib it is necessary to find a way to enhance the lubrication property of water-based cutting fluid. Up to now, a great deal of research has been done on this subject [9–11]. One simple approach is putting additives into regular lubricants to reduce friction and wear, which has been widely applied in lubrication engineering [2]. Many researchers [12–14] have reported that nanoadditives are effective in improving the properties of lubricants. They applied different kinds of nanoparticles made of polymer, metal, organic, or inorganic materials to the fabrication of nanolubricants. In order to make the sufficient exertion of the lubricating advantage of nanographite, this research aims to improve the lubrication performance of water-based

cutting fluid by adding nanographite as an additive [15]. In this study, commercially available nanographite and water-based cutting fluid were used as materials. Graphite nanoparticles were firstly modified through in situ emulsion polymerization to obtain the water-soluble nanographite [16–19]. UV-visible (vis) spectrophotometry was used to evaluate dispersion stability Tyrosine-protein kinase BLK and determine the optimal polymerization condition. Afterwards, water-soluble nanographite was added into water-based cutting fluid as lubrication additive. The dispersion state of nanographite [20] in aqueous environment was characterized by scanning electron microscopy (SEM), and the lubrication performance of water-based cutting fluid with nanographite additive was tested by some tribological experiments. Methods Materials Commercially available nanographite (Qingdao HuaTai Lubricant Co., Qingdao, China; D50 = 400 nm) was used in the research. The size distribution of the graphite nanoparticles is shown in Figure 1.